undefined
Ultrasonic cleaning machine use
First of all, dentists wear moisture-resistant coveralls or aprons, round hats, masks, goggles or protective masks, rubber gloves or puncture-resistant latex gloves, to protect the doctor himself from contaminating himself.
First of all, dentists wear moisture-resistant coveralls or aprons, round hats, masks, goggles or protective masks, rubber gloves or puncture-resistant latex gloves, to protect the doctor himself from contaminating himself.
Check the ultrasonic cleaning machine to ensure that no foreign objects fall to the bottom of the ultrasonic cleaning machine cavity, if any must be removed from foreign objects.
Put the prepared cleaning agent in the cleaning tank in proportion to the proportion of water ratios.
Turn on the power switch, the machine for self-test. Open the degassing switch to exclude gas. Set the solution temperature, heating cleaning solution, heating set temperature can not exceed 45C.
After preliminary rinsing of the instruments under flowing water, place the instruments in the bottom of the ultrasonic cleaning machine cavity for cleaning. Need to pay attention to, the instruments fully open, detachable instruments to separate the components, pipette and other slender hollow instruments openings placed downward tilt, ensure that the cavity is filled with solution, cleaning fluid level immersed in the instruments 2 ~ 4cm.
Cover the lid of the ultrasonic cleaning machine, set the cleaning time, start ultrasonic cleaning. Ultrasonic cleaning time in 3~5min, should not exceed 10min.
Instruments after ultrasonic machine cleaning to continue the subsequent cleaning, rinsing, end not rinsing and disinfection treatment.
Ultrasonic cleaning is completed after discharging the liquid in the ultrasonic cleaning machine.
Related news
